Name: Gunsmithing Service
SKU: 853
Availability: InStock

Gun Cleaning & Oiling

Gun Cleaning & Oiling (+$150.00)

Sight Work

Bore Sighting Customer Gun (+$150.00)

Drill And Tap Barrel Or Receiver For Sights- Per Hole (+$150.00)

Cut Dovetail In Barrel (+$150.00)

Install Dovetail Sight (+$150.00)

Install Front/Mid Rib Shotgun Bead (+$150.00)

Plug hole and re-drill for bead (+$150.00)

Install Receiver Sights Gun Drilled and Tapped (+$150.00)

Muzzle Loader Work

Pull ball (+$150.00)

Remove broken ramrod (+$150.00)

Stuck breech plug (+$150.00)

Cut & Crown Your Barrel

Rifle and shotguns & handguns (+$150.00)

Shot Gun Work

Long Forcing Cone Non-plated bores, per barrel (+$150.00)

Long Forcing Cone Plated bores, per barrel (+$150.00)

Straighten Or Adjust Barrel (+$150.00)

Polish Chamber/Bore (+$150.00)

Metal Finishing

Oxynate and re-bluing abrasive/bead blast/ wire wheel(matte) finish (+$300.00)

Handgun Deluxe Finish: same as above followed by ##240 grit and ##400 grit polish with new screw holes and corners protected and square (+$320.00)

Rifle/Shotgun Deluxe Finish: same as above followed by ##240 grit and ##400 grit polish with new screw holes and corners protected and square (+$325.00)

Handgun Master finish same as deluxe finish with all polishing marks removed, no ripples and finished with ##555 polished to a mirror finish (+$375.00)

Rifle/Shotgun Master finish same as deluxe finish with all polishing marks removed, no ripples and finished with ##555 polished to a mirror finish (+$400.00)

Install Front Sight Ramp

Sweat on type (+$150.00)

Screw on type( including drill and tap) (+$150.00)

Install Insert In Pistol Sight (+$150.00)

General Barrel, Action & Rifle Work

Check Headspace (+$150.00)

Make Chamber Cast (+$150.00)

Remove Stuck Fired Case From Chamber (+$150.00)

Remove Live Round From Chamber (+$150.00)

Remove Obstruction From Bore (+$150.00)

Lap Barrel (+$150.00)

Install Pre-Threaded & Chamber

Barrel- not including polishing & bluing (+$200.00)

Lap In Bolt Lugs- not including setting barrel back Or fitting new barrel (+$150.00)

Welding On A New Bolt Handle (+$150.00)

Triggers (installation or adjustment) Shilen, Timney, Dayton-traister, Moyer type (+$150.00)

Double set (+$250.00)

Single set (+$150.00)

Install Muzzle Device (threaded barrel does not include muzzle device) (+$150.00)

Scope Mounting

Gun drilled and tapped (+$150.00)

Stock Work

Hunting Rifle (+$150.00)

Install Recoil Pad – labor only (+$150.00)

Install Adjustable Butt Plate (+$150.00)

Install Sling Swivels – Std and Q/D Simple installation in butt stock (+$150.00)

Drill stock and install recoil pad (+$150.00)

Fit Bed And Finish Fiberglass Stock (+$350.00)

Pre Finished Synthetic Stock (+$150.00)