Precision Craftsmanship for the Discerning Shooter
You deserve nothing less than perfection when it comes to your firearms.
At Vault Arms, our Gunsmith and Machinist combine decades of experience, cutting-edge technologies, and tried and true techniques to give you the customization in repair and enhancement services you need to always hit your mark.
We make it easy for you to get the Gunsmithing or Machining you need. Pick the package you need below.
Gun Cleaning & Oiling
A clean, well-maintained fire-arm is safer and essential for ensuring its safety and functionality.
|
$50 – $75 |
Custom Cerakote Finishes
Take your firearm to the next level with our professional Cerakote service.
Single Color Application
| Handguns | Starting at $150 |
| Long Guns | Starting at $250 |
Sight Work
Precision is non-negotiable. We ensure pinpointed accuracy and preserve your firearm’s integrity with our sight work.
| Bore Sighting Customer Gun | $50 |
| Drill And Tap Barrel Or Receiver For Sights- Per Hole | $50 |
| Cut Dovetail In Barrel | $60 – $100 |
| Install Dovetail Sight | $50 – $50+ |
| Install Front/Mid Rib Shotgun Bead | $50- $75 (Plus cost of bead) |
| Plug hole and re-drill for bead | $50-$75 |
|
Install Receiver Sights |
$50 |
* Sight in customer gun-does not include the cost of ammo targets, etc.
Handgun Work
Your handgun needs to be tuned up just like your car. Our professional gunsmith will leave your gun safer and more reliable. So you can shoot with confidence.
| Revolver Action Job (Clean, Smooth Action, Not Including Replacement Parts | $75 – $160 |
| Rebarrel Revolver -Remove the Old Barrel and Replace with a New Factory Barrel, Labor Only (Does Not Include New Barrel) | $75 |
| Remove/Modify Revolver Hammer Spur | $50 – $80 |
| Semi-Auto Pistol Action Job ( Clean Smooth Action, Not Including Parts | $130 * Sight in customer gun-does not include the cost of ammo targets, etc. |
| Tighten Slide Of 1911 Auto | $120 – $175 |
| Fit Barrel To 1911 Auto, Not Including Barrel | Non ramped barrel: $90 – $150 Ramped Barrel: $100 – $175 |
|
Fit And Install Barrel Bushing On 1911 Does not include cost of bushing |
$90 |
| Throat, Polish Barrel And Feed Ramp Of 1911 | $60 |
|
Fit New Trigger To 1911 |
$50 |
|
Fit Custom Hammer To 1911 |
$75 |
| Cut Slide for bo-mar(w/o sight Plain cut w/slide shields | $160 |
| Cut Slides For Dovetail Front Sight | $95 |
| w/o cost of sight Cut slide for novak rear(w/o cost of sight) | $100 |
|
Install Stake-On Front |
$60 |
|
Install Fiber Optic Front Sight |
$50 |
|
Install Rear Sight |
$50 |
| Modify 1911 auto frame for beaver tail safety Includes fitting of safety, does not include cost of safety | $50 |
|
Long Forcing Cone |
$55 – $80 |
| Plated bores, per barrel | $75 – $100 |
|
Resolder Rib |
HOUR RATE |
| Straighten or Adjust Barrel | $50 – $95 |
| Polish Chamber/Bore | $50 |
Muzzle Loader Work
| Pull ball | $50 – $75 |
| Remove broken ramrod | $60 – $100 |
| Stuck breech plug | $60 – $120 |
Cut & Crown Your Barrel
We’ll cut and crown your gun to fit you perfectly – our gunsmith makes sure it feels right and shoots the way you want.
| Rifle and shotguns & handguns | $50 – $95 |
Shot Gun Work
Expert gunsmithing gives your shotgun’s safety, performance, and longevity, giving you peace of mind every time you take aim.
| Long Forcing Cone Non-plated bores, per barrel |
$55 – $80 |
| Long Forcing Cone Plated bores, per barrel |
$75 – $100 |
| Resolder Rib Not including bluing |
Hour Rate |
| Straighten Or Adjust Barrel | $50 – $95 |
| Polish Chamber/Bore | $50 |
Metal Finishing
Make sure your firearm is durable, resistant to corrosion and has the look you’ll love.
| Oxynate and re-bluing abrasive/bead blast/ wire wheel(matte) finish | $120 – $300 |
| Deluxe Finish: same as above followed by ##240 grit and ##400 grit polish with new screw holes and corners protected and square |
Handgun: $130 – $320 Rifle/shotgun: $150 – $325 |
| Master finish same as deluxe finish with all polishing marks removed, no ripples and finished with ##555 polished to a mirror finish |
Handgun: $265 – $375 Rifle/shotgun: $300 – $400 |
Install Front Sight Ramp
A professionally installed front sight ramp improves your aim and target spotting, for greater accuracy and confidence.
| Sweat on type | $50 – $100 |
| Screw on type( including drill and tap) | $60 – $80 |
| Band Type | Hourly Rate |
| Install Insert In Pistol Sight | $50 – $60 |
General Barrel, Action & Rifle Work
Make sure every shot is on target. Expert gunsmithing for barrels, actions, and rifles ensures precision performance. You’ll get fewer jams and better accuracy, so every shot counts.
| Check Headspace | $50 – $70 |
| Make Chamber Cast | $50 – $95 |
| Remove Stuck Fired Case From Chamber | $50+ |
| Remove Live Round From Chamber | $65 – $150+ |
| Remove Obstruction From Bore | $65 – $150+ |
| Remove Fouling From The Barrel | Hourly Rate |
| Remove Live Round From Chamber | Hourly Rate + Materials |
| Lap Barrel | $50 – $130+ |
Install Pre-Threaded & Chamber
Get your barrel fitted, threaded, and chambered right by a pro gunsmith – it’ll shoot better, work with suppressors, and feed ammo smoothly every time.
| Barrel- not including polishing & bluing | $125 – $200 |
| Lap In Bolt Lugs- not including setting barrel back Or fitting new barrel | $50 – $75 |
| Welding On A New Bolt Handle | $150 |
| Triggers (installation or adjustment) Shilen, Timney, Dayton-traister, Moyer type | $60 |
| Double set | $100 – 250 |
| Single set | $50 – 140 |
| Install Muzzle Device (threaded barrel does not include muzzle device) | $50 |
Scope Mounting
Get your scope mounted right by a professional gunsmith– no more wobbles or misses, just spot-on accuracy every time you shoot.
| Gun drilled and tapped | $50 |
Stock Work
Get your gun fitted just for you – our gunsmith can customize the stock so it feels perfect when you shoot.
| Hunting Rifle | $150 |
| Install Recoil Pad – labor only | $80 |
| Install Adjustable Butt Plate | $80 – $150 |
| Install Sling Swivels Std and Q/D Simple installation in butt stock |
$25 – $50 |
| Drill stock and install recoil pad | $50 – $95 |
| Fit Bed And Finish Fiberglass Stock | $175 – $350 |
| Pre Finished Synthetic Stock Fit and install barrel action |
$50 – $50 |
AR-15 Work
Our gunsmiths keep your safety front of mind. We will use the right tools to ensure proper assembly, headspacing and function testing has been completed.
| Maintenance and cleaning disassembly, cleaning and oil |
$60 |
| Rebuild and maintain includes new springs and new gas rings added to cleaning |
$120 |
| Install aftermarket trigger | $60 |
| Install free float | $100 |
| Assemble complete upper | $65 |
| Assemble complete Lower | $65 |
| Assemble complete rifle | $150 |
| Install muzzle device on a pre threaded barrel | $25 |
| Thread barrel | $175 |
| Open gas port for functioning | $60 |
| Install or replace gas block (not including gas block) | $50 |
| Install or replace AR barrel | $60 |
| Install or replace Buttstock and buffer | $50 |